GB/T 14092.3-2009 机械产品环境条件 高海拔

作者:标准资料网 时间:2024-05-17 21:07:35   浏览:9566   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:机械产品环境条件 高海拔
英文名称:Environmental condition for machinery products—High altitude
中标分类: 综合 >> 基础标准 >> 环境条件与通用试验方法
ICS分类: 试验 >> 试验条件和规程综合
替代情况:替代GB/T 14092.3-1993
发布部门:中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
发布日期:2009-05-06
实施日期:2009-11-01
首发日期:1993-01-13
作废日期:
主管部门:中华人民共和国国家质量监督检验检疫总局
提出单位:全国电工电子产品环境条件与环境试验标准化技术委员会
归口单位:全国电工电子产品环境条件与环境试验标准化技术委员会
起草单位:广州电器科学研究院
起草人:钟亚军、赵佩玉、刘奎芳
出版社:中国标准出版社
出版日期:2009-11-01
页数:12页
计划单号:20075877-T-469
适用范围

本部分规定了机械产品高海拔环境条件的环境参数及其严酷等级。
本部分适用于1000m~5000m 高海拔地区使用的一般用途的机械工业产品。包括农机具、内燃
机、工程机械、矿山机械、石化通用机械、电工产品、仪器仪表、机床工具、通用零部件、重型机械、起重运输机械等。
本部分不适用于高海拔地区存在爆炸危险介质、矿井等特殊环境条件下使用的机械产品。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过GB/T14092的本部分的引用而成为本部分的条款。凡是注日期的引用文
件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成
协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本
部分。
GB/T4798.4 电工电子产品应用环境条件 无气候防护场所固定使用(GB/T4798.4—2007,
IEC6072134:1995,MOD)
GB/T14091 机械产品环境参数分类及其严酷程度分级

所属分类: 综合 基础标准 环境条件与通用试验方法 试验 试验条件和规程综合
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforProtectiveClothingMaterialResistancetoPuncture
【原文标准名称】:防护服材料抗穿刺性的标准试验方法
【标准号】:ASTMF1342-2005
【标准状态】:现行
【国别】:美国
【发布日期】:2005
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:耐力;防护服装
【英文主题词】:resistance;protectiveclothing
【摘要】:
【中国标准分类号】:C73
【国际标准分类号】:13_340_10
【页数】:5P;A4
【正文语种】:英语


Product Code:SAE ARP743
Title:Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces By the Particle Count Method (Cancelled May 2010)
Issuing Committee:A-6c1 Contamination And Filtration Committee
Scope:this SAE Aerospace Recommended Practice (ARP) describes two procedures for sampling particles in dust controlled spaces. One procedure covers airborne dust above 5 μm. The other (and newly added procedure) covers particles of 25 μm and larger that "fall out" of the environment onto surfaces. In each case the particles are sized in the longest dimension and counted. Airborne particles are reported as particles per cubic meter (cubic foot) whereas particles collected in fall out samples are reported as particles per 0.1 square meter (square foot). This document includes English units in parentheses as referenced information to the SI units where meaningful.These procedures may also be used for environmental analysis where the quality of the particles by visual or chemical analysis is intended.