IEC 61207-2-1994 气体分析器性能表示第2部分:气体中的氧(利用高温电化学传感器)

作者:标准资料网 时间:2024-05-03 18:00:29   浏览:9782   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Expressionofperformanceofgasanalyzers-Part2:Oxygeningas(utilizinghigh-temperatureelectrochemicalsensors)
【原文标准名称】:气体分析器性能表示第2部分:气体中的氧(利用高温电化学传感器)
【标准号】:IEC61207-2-1994
【标准状态】:现行
【国别】:国际
【发布日期】:1994-04
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:IEC/SC65D
【标准类型】:()
【标准水平】:()
【中文主题词】:试验;电气工程;高温;电化学方法;工作性能;稳定性试验;氧;气体分析;气体分析仪
【英文主题词】:Constancytesting;Definitions;Electricalengineering;Electrochemicalmethods;Gasanalysis;Gasanalyzers;Gases;Hightemperatures;High-temperaturetechniques;Oxygen;Performanceinservice;Testing
【摘要】:Theobjectistospecifytheterminologyanddefinitionsrelatedtothefunctionalperformanceofgasanalyzersusinghigh-temperatureelectrochemicalsensorsforthecontinuousmeasurementofoxygenconcentrationinasampleofgas,tounifymethodsuse
【中国标准分类号】:N50
【国际标准分类号】:71_040_40
【页数】:27P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:硬聚氯乙烯(PVCU)塑料管道系统用溶液剂型胶粘剂
英文名称:Solvent cements for unplasticized poly (vinyl chloride) (PVC-U) plastic piping system
中标分类: 化工 >> 合成材料 >> 胶粘剂
ICS分类: 橡胶和塑料工业 >> 粘合剂和胶粘产品
发布部门:中华人民共和国国家经济贸易委员会
发布日期:2002-12-27
实施日期:2003-04-01
首发日期:1900-01-01
作废日期:1900-01-01
提出单位:中国轻工业联合会
归口单位:全国塑料制品标准化技术委员会
起草单位:华亚(厦门)塑料有限公司、福建亚通塑料有限公司
起草人:许盛光、魏作友、杨慧丽
出版社:中国轻工业出版社
出版日期:2003-04-01
页数:8页
适用范围

本标准规定了由树脂和溶剂及其他添加剂配制而成的硬聚氯乙烯(PVCU)管道系统用胶粘剂的产品分类、材料和生产、要求、试验方法、检验规则及标志、包装、运输、贮存。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 合成材料 胶粘剂 橡胶和塑料工业 粘合剂和胶粘产品
Product Code:SAE AMS3334
Title:Silicone Rubber, Extreme Low Temperature Resistant, 35-45
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for rubber-like parts required to operate or seal from -80 to +120 degrees C (-112 to +248 degrees F), compounded especially for operation at extreme low temperatures. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with low-aniline point petroleum-base fluids, including fuels, due to excessive swelling.